Okay, maybe that title is a bit melodramatic, because there are a million and one very old boats out there that are completely safe. It is without question, however, that as a boat’s age becomes measured by the decade instead of by the year, there are a few significant forms of age-related structural failure which can lead to big, big problems. What’s worse is that the long age-span of fiberglass means that there are more and more aging boats out there year after year, and what’s even worse than that is that many of the potential failures aren’t apparent to the naked eye—at least, not until a boat sinks. So whether you own an old boat or you’re considering a used boat purchase, be sure to looks for these issues.
If your boat or the boat you’re looking at has bilge access, in all likelihood you can get see the stringers from there. Use a flashlight, and look closely at where they meet the hull and bulkheads. Hairline cracks are to be expected, but anything big enough to slip the edge of a dime inside of is a sign of trouble.
What if you can see an area where the stringer has actually separated from the boats hull? The boat is unsafe, period, and needs to be removed from service immediately until some major-league repairs can take place.
If the hull and deck or liner separate, the results can be completely catastrophic. Just last season, a 32’ walkaround was in rough seas when the hull and deck separated, unbeknownst to the captain and passengers. With every wave, water poured in through the open joint. Eventually it filled the bilge. By the time anyone realized what was going on it was too late, and when a wave hit the boat broadside, it swamped and then rolled. Four people died.
Again, the toughest thing about finding deterioration in a hull-to-deck joint is the fact that it’s often difficult to look at. You can usually get an eyeball on it by inserting your head into an anchor locker, if there’s one with a big enough opening. And sometimes it’s visible from the bilge, looking up and to the sides. But it’s rare to have visual access to the entire joint, all the way around the boat. The only sure way to gain access to it 360-degrees around the boat is to remove the rubrail. You can replace any suspect-looking fasteners, and seal any gaps or questionable looking seams with a sturdy adhesive-sealant like 3M 5200. But when in doubt about a hull-to-deck joint, take the boat to a pro.
Check for through-hull deterioration by looking for significant color difference between the outside and inside of the through-hull. Cracks are obviously also a reason for concern. When in doubt you can test the plastic by giving it a mild rap with a hammer or the handle of a screwdriver, but if there’s any question, the safest thing to do is simply have it replaced.
There are two fortunate aspects to rotting, delaminating decks on boats. First, they’re pretty easy to find. Just walk all over the boat, and if the deck feels spongy or springy anywhere, it’s on its way to needing replacement. Second, cutting out and replacing a dead deck isn’t a massive job. Remember that 19-footer of mine? I had a fiberglass shop professionally replace the deck and it only cost around $1,500.
Any hardware that’s lacking a backing in good shape should quickly become apparent. If, for example, a cleat moves one iota when you kick or shake it, something’s obviously wrong. And in most cases fixing the problem is quite easy; just pull a few nuts and bolts, add a new backing plate, and you’re good to go.
To check out some of the best boating videos on the web click here.
Lenny Rudow
Seven tails. Seven beautiful bronze tails with a dot in the middle. That’s how many…
We hear more and more about electric boats, but would an electric outboard make sense…
Indianola Fishing Marina is proud to present the inaugural Manufacturers In-Water Boat Show, by Coastal…
The U.S. Fish and Wildlife Service and its genetic research partners announce the birth of…
People are reporting seeing wild-looking cats throughout America that don't match with native wildlife. Chester…
Seagrass beds are crucial ecosystems along coastal areas, especially from the Middle Coast down to…